General Information - Orbegozo VP 7100 Manual De Instrucciones

VP 7100
• Touching hot metal parts, hot water or
steam can cause burns. Take care when
touching hot parts of the steam generator
and iron.

GENERAL INFORMATION

This complete steam station consists of an iron with a separate steam generator. The
iron is equipped with a steam button to give a shot of steam, and a temperature-
control dial to set the temperature to the required level.
1 Steam lock button
2 Temperature selector dial
3 Safety fill cap
4 ON/OFF button(iron)
PREPARING THE APPLIANCE FOR USE
It is recommended that you fill the water reservoir with a mixture of 50% tap water and
50% distilled water. This is particularly desirable in areas with hard water, since this will
prevent the formation of excessive lime scale.
Make sure the water reservoir is always filled, even if you do not plan to use the steam
function.
1. Make sure the appliance is not plugged in.
2. Unscrew the cap of the boiler
3. Fill the water with the amount of water needed.
4. Replace the cap of the boiler.
5 ON/OFF button(boiler)
6 Boiler indicator light
7 Steam regulator button
8 Surge of steam button
14