Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INFLATE RAFTS AND MATTRESSES
The high volume air pump is used for inflatables only (more specifically high
volume/low pressure applications) and cannot be used for tires and balls, which
require higher pressure.
1. Attach the desired inflation adapter (connected to the air hose) to the high volume
air hose. Connect high volume air hose to the high volume inflate portal on the
front of the inflator. Insert opposite end into the inflatable's air inlet.
2. Plug power cord into 120 volt wall power outlet or 12 volt accessory power outlet.
3. Flip the toggle switch down to power the inflator for high volume inflation. Once
desired pressure is reached, toggle switch to middle position to turn off inflator.
Unplug power cord and remove all connections.
1
2
3
Publicidad
Tabla de contenido
