HyperIce Vyper Manual De Instrucciones página 3

VYPER // VIBRATING FOAM ROLLER
INSTRUCTIONS FOR USE
Please read prior to use
The VYPER is a cutting-edge fitness and recovery device that uses pressure and vibration to improve the body's overall performance.
The VYPER is manufactured using industry's best components providing just the right amount of pressure and vibration.
The VYPER offers people of all ages and levels the combined benefits of compression (pressure) and vibration to improve the body's overall
performance, enhance recovery, flexibility, range of motion to prevent injury and thus improve overall well-being.
Charging:
• Fully charge for two hours before first use.
• To charge, connect the adapter to the charging port and plug into wall
charger.
• Unit will charge whether Power Switch is in ON or OFF position.
• In ON position, LED lights illuminate to show battery level and indicate
active charging.
• In ON position, LED lights will turn off when fully charged while adapter
is plugged in.
• Unit may be recharged at any time and at any battery level.
• It is not recommended to fully deplete the battery to the red LED level.
• The average run-time is 2 hours at level three, and longer at lower
levels.
• Toggling the power switch to OFF isolates power from the circuitry and
is recommended during storage and travel.
Operating:
• With Power Switch in ON position, press the power button once to turn
unit on to level one, twice to turn unit to level two and three times for level
three. Pressing the power button again will turn the unit off. The blue LED
lights will indicate the corresponding power level.
• The unit will turn off after 10 minutes of use. To continue use, simply
press the power button again to the desired level.
Maintenance , Cleaning and Storage:
• Use a towel or soft cloth to wipe any moisture from unit.
• Keep unit away from heat sources, liquids, and children.
Warnings and Caution
• Do not immerse unit in water. Keep liquids away from ventilation ports, buttons and switches.
• Do not remove screws or attempt to disassemble.
• Do not operate continuously for more than one hour. After one hour use, allow unit to rest for 30 minutes before re-using.
• Unplug the unit after charging or prior to use.
• For storage or travel, toggle power switch to OFF position.
• For adult use only. Do not use if injured. Consult your doctor before using this product.
• Use product only according to Instructional Use materials available at www.hyperice.com.
DISCLAIMER
Please do not use the VYPER, or any vibration high-intensity exercise device without first getting approval from your doctor if any of the
following apply: pregnancy, diabetes with complications such as neuropathy or retinal damage, wear of pace-makers, recent surgery,
epilepsy or migraines, herniated disks, spondylolisthesis, spondylolysis,or spondylosis, recent joint replacements or IUD's, metal pins or
plates or any concerns about your physical health. Very frail individuals and children should be accompanied by an adult when using any
vibration device.
These contraindications do not mean that you are not able to use a vibration or exercise device but we do advise you to consult a doctor first.
Ongoing research is being done on the effects of vibration exercise for specific medical disorders. This will likely result in the shortening
of the list of contraindications as shown above. Practical experience has shown that integration of vibration exercise into a treatment
plan is advisory in a number of cases. This must be done on advice of and in accompaniment with a doctor, specialist or physiotherapist.
1. Charging Port
2. Power Switch
3. Battery level indicator LED (green, red)
4. AC wall charger (16.8VDC-1A)
5. Power Button
6. Frequency level indicator LED (blue)
Specifications
• AC Charger: 110-240V 50/60Hz - 0.5A - 16.8VDC- 1A
• Frequency: Low 48Hz, Medium 60Hz, High 72Hz
• Weight: 3 lbs / 1.6 kg (including charger)
• Designed & Assembled in USA with components from
China and Germany
EN