Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TABLE OF CONTENTS
PRODUCT SPECIFICATIONS
Depth of cut at 90º: 3" (76.2 mm)
Depth of cut at 45º: 2-1/2" (63.5 mm)
Saw blade carbide tipped: 10" (254 mm)
Arbor: 5/8" (15.8 mm)
Saw blade speed: 4,500 R.P.M. (no load)
Universal motor: 2.7 H.P. (maximun load) 120 V. 60 Hz.
PROPOSITION 65 WARNING
Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals
(known to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are:
• Lead based paints
• Crystalline silica from bricks, cement and other masonry products
• Arsenic and chromium from chemically treated lumber
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to
these chemicals, work in a well-ventilated area and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
POWER TOOL SAFETY:
GENERAL SAFETY INSTRUCTIONS Read and understand all the instructions below before using the power tool. These
safety instructions are not meant to cover every possible condition that could occur. As with any power tool, common
sense, vigilance and due care must be used.
1. READ and become familiar with this entire Operator's Man-
ual. LEARN the tool's applications, limitations and possible
hazards.
2. CAUTION Look for this symbol that identifies important
safety precautions. It means BE ALERT! YOUR SAFETY IS IN-
VOLVED!
3. NEVER OPERATE THIS MACHINE WITHOUT THE SAFETY
GUARD IN PLACE FOR ALL THROUGH
-SAWING OPERATIONS.
4. DO NOT USE IN A DANGEROUS ENVIRONMENT such
as damp or wet locations or in the rain. Keep work area well
lighted.
All manuals and user guides at all-guides.com
2
2
3
4
4
5
6
7
Parts List and Exploded Views
Die cast aluminum table: 26-7/64" x 17-1/8" (663 x 435 mm)
Aluminum extrusion fence: 17-7/8" x 2" (454 x 50.8 mm)
ABS miter gauge: 30º, 45º, 60º, 75º, 90º (L & R)
Machine dimensions: 27-23/64" x 26-3/16" x 38-9/16"
Weight: net/gross: 17.7/20 Kgs.
5. DO NOT use power tools in the presence of flammable
liquids or gases.
6. KEEP WORK AREA CLEAN. Cluttered areas and benches
invite accidents.
7. KEEP CHILDREN AWAY. All visitors should be kept at a
safe distance from the work area.
8. DO NOT FORCE THE TOOL. It will do the job better and
safer if used at the rate for which it was designed.
9. USE THE RIGHT TOOL. Don't force the tool or attachment
to do a job for which it is not designed.
1
(695
x
665
x 980 mm)
width
-
depth -
height
7
3
10
11
12
12
13
13
Publicidad
Capítulos
Tabla de contenido
