Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
HDTV BACK— JACKS LOCATIONS AND FUNCTIONS
Œ
Component Video Input (COMPO 2)—Connect
digital video equipment to the Y, Pb, Pr and VIDEO 2
Audio L/R jacks. These jacks will automatically detect
the type of signal being received (HDTV, EDTV, or
SDTV).
S-Video (Video 1 and 2) Input—To enhance video
detail use the S-Video jacks instead of the Video jacks,
if available on your external equipment. (S-Video con-
nections will override connections to the Video input
jacks.)
Ž
Digital Audio Output—Use an Optical Audio cable to
connect the Digital Audio Output to an advanced
stereo home theater system equipped with Dolby
Digital 5.1.
HDMI (High Definition Multimedia Interface)
Input—Connect digital video equipment to this jack. It
only takes one high bandwidth cable (not supplied) to
communicate between the video/audio equipment and
this TV. This connection is compatible with DVI
equipped devices. (Separate audio connection is
required for DVI device.)
Audio
Cables—Provides
right audio for your external equipment
connections.
Component:Y, Pb, Pr—Use these cables to
connect your component equipment. This
connection provides the best picture, but
does not include sound. (Cable colors:
Y = green, Pb = blue, and Pr = red.)
Composite Audio/Video (RCA type)—
Use these cables for standard analog
audio/video connections. Normally cables
are color coded: Yellow for Video, White for
(L) Audio, and Red for (R) Audio.
Ž
Œ
’
‘
®
GLOSSARY OF CABLES
analog
left /
Need help?
“ ”
•
Analog Audio Out (L/R) Jacks—Connect external
audio equipment here. (See page 11.)
‘
Component Video Input (COMPO 3)—Connect
digital video equipment to the Y, Pb, Pr and AUDIO 3
(L/R) jacks. (See page 10.) These jacks will automati-
cally detect the type of signal being received (HDTV,
EDTV, or SDTV).
’
Audio/Video Input (Video 1/Video 2)—Connect
standard video equipment here. (See page 11.)
NOTE: S-Video1/2 connections override the Video1/2
video composite connections.
“
Analog Antenna Input (UHF/VHF/CATV)—Connect
an RF antenna or cable system to this jack as shown
on page 5.
”
Digital Antenna Input—Connect an RF antenna to
this jack as shown on page 5.
•
Service Terminal—For technical use only.
Coaxial Cable—Used to connect a signal to
your digital or Analog RF Antenna In terminal.
Optical Digital Audio—Use this cable to
connect the DTV's digital audio output to a
multi-channel audio receiver.
S-Video Cable—This cable provide separate
luminance and color signals for higher reso-
lution and better picture quality. Use this
cable instead of the regular composite video
cable (RCA type), when available.
NOTE: None of these cables are supplied with this DTV.
www.sanyoctv.com
Visit our Web site at
1-800-877-5032
or Call
7
Publicidad
Capítulos
Tabla de contenido
