All manuals and user guides at all-guides.com
O
P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
Press the MENU
button
to display the menu.
Press the UP/DOWN
buttons to select "Channel",
then press the ENTER
button.
2
Press the UP/DOWN
buttons to select
"Auto Program".
Press the ENTER
button.
3
Press the ENTER
button
to select "Start".
The TV will begin memorizing
all of the available channels.
4
After all the available
channels are stored, the
"Channel" menu reappears.
Press the EXIT button
to exit.
Alternate method:
Press the AUTO PROG. button under the remote's cover.
25
English-
First, select the correct
signal source (Air, STD, HRC,
or IRC). See steps 1~2 on the
previous page.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one
to two minutes.
Press the ENTER
button at
any time to interrupt the
memorization process and return
to the "Channel" menu.
To stop the search before it has
finished, press the ENTER
button with "Stop" selected.