Pioneer DVR-SK12D Manual De Instrucciones página 14

All manuals and user guides at all-guides.com
TROUBLESHOOTING
What may at first seem like a malfunction may only be a simple operation error. Check
the list below before doing anything else.
If the problem still persists, contact your dealer or the local Pioneer Service Station.
Contact the software manufacturer for software problems.
7 The computer or software does not recognize the unit.
÷ The USB cable, IEEE 1394 cable or power connector is not correctly plugged in.
= Check cable connection.
÷ The operating system does not support the unit.
= Use an operating system that supports the unit. (See page 11 for a list of supported
operating systems.)
[DVD-R/RW and CD-R/RW Discs]
7 Data cannot be recorded/errors occur during recording
÷ Check whether the discs used are the recommended type.
÷ Check whether there is enough free space on the disc.
÷ Check whether the required software is installed.
÷ Check whether the operating environment satisfies software requirements.
÷ The DVD-R disc can only be recorded at 2x speeds.
= Check whether the disc is a 2x speed disc.
÷ Check whether the disc has been finalized (to prevent further recording).
÷ Check whether the disc is inserted with the label side up and the recording side
facing down.
÷ Check whether the disc is dirty or damaged.
7 Failure to read recorded discs
÷ Check whether used disc is the recommended type.
÷ Check whether the disc is inserted with the label side up.
÷ Check whether the disc is an unrecorded disc.
÷ Check whether the disc is dirty or damaged.
÷ Check whether the required software is installed.
÷ Check whether the unit is on a level surface.
÷ Condensation may have occurred on the optical components. Turn off the unit and
wait awhile before trying again.
* For details on how to record discs, see the Help function or the instruction manual
supplied with the software.
14
En