Safety Harness; Folding Stroller - Baby Jogger bench seat Manual Del Usuario

ASSEMBLY INSTRUCTIONS
IMPORTANT -
Read these instructions carefully
before use and keep them for future reference. Your
child' s safety may be affected if you do not follow
these instructions.
1 Clip the bottom of the Bench Seat onto the
stroller cross-bar.
2 Clip the arms of the Bench Seat onto the
stroller frame.
Make sure the clips lock on top of the
mounts.
3 Slide the Foot Rest vertically onto the
stroller' s bottom cross-bar and then rotate
down to lock into place.

SAFETY HARNESS

4 Slide waist strap buckles into the harness
buckle until they lock into position.
5 Press center release button to release
harness.
6 To adjust waist strap length: Hold the plastic
guide and pull the front waist strap end to
tighten or pull the rear waist strap end to
loosen.
To adjust crotch strap length: Hold the plastic
guide and pull the lower crotch strap end to
tighten or pull the upper crotch strap end to
loosen.

FOLDING STROLLER

• Remove your child from the seat.
7 Unclip the bottom of the Bench Seat by
rotating the clip upwards.
8 Rotate the seat all the way around so that is
hangs from the connecting arms.
Refer to your stroller' s original manual for
instructions on folding the stroller.
All manuals and user guides at all-guides.com
FOLLOW ALL THE INSTRUCTIONS AND WARNINGS IN
THE CITY SELECT® LUX INSTRUCTION MANUAL AND
ON THE PRODUCT
•
•
•
•
•
•
•
3
WARNING:
WARNING: Never leave the child unattended.
WARNING: Ensure that all the locking
devices are engaged before use.
WARNING: This product is not appropriate
for children under 3 years of age or weigh
more than 20 kg.
WARNING: Always use the restraint system.
WARNING: Check that bench seat is
correctly engaged before use.
This product is designed only to be used with
the City Select Lux.
®
WARNING: NEVER allow the child to STAND
on the footrest while in use.
EN