Kettler KIDDI-O 8727 Instrucciones Para El Montaje página 4

USA ASSEMBLY INSTRUCTIONS
Assembly of the toy vehicle
■ Please ensure that the balance bike will only be used for playing when assembly has been
carried out correctly, and checked, by an adult.
■ The balance bike must be assembled carefully by an adult person. Study the assembly
instructions carefully before beginning work. Assemble the balance bike in the exact
sequence shown by the letters in the diagrams. This is essential for the safe function and use
of the balance bike.
■ Please note that there is always a danger of injury when working with tools or doing manual
work. Therefore please be careful when assembling this product.
■ Ensure that your working area is free of possible sources of danger, for example don't leave
any tools lying around. Always dispose packaging material in such a way that it may not
cause any danger. There is always a risk of suffocation if children play with plastic bags!
■ Bolt all the parts together loosely at first, and check that they have been assembled correctly.
Tighten the locknuts by hand until resistance is felt, then use wrench to finally tighten nuts
completely against resistance (locking device). Then check that all screw connections have
been tightened firmly. Attention: once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be replaced.
■ When assembling plastic grips: The grips can be pushed onto the handlebars more easily if
they are first soaked in warm water.
■ Please keep original packaging of this article, so that it may be used for transport at a later
date, if necessary.
■ For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
List of spare parts page 19-20
When ordering spare parts, always state the full article number, position number, the quantity
required.
Example order: Model # 8727-720/ position no. 2/1 piece
Please keep original packaging of this article, so that it may be used for transport at a later date,
if necessary. Goods may only be returned after prior arrangement and in (internal) packaging,
which is safe for transportation, in the original box if possible. It is important to provide a detailed
defect description / damage report! Important: spare part prices do not include fastening
material; if fastening material (bolts, nuts, washers etc.) is required, this should be clearly stated
on the order by adding the words „with fastening material".
Waste Disposal
KETTLER products are recyclable. At the end of its useful life please dispose of this article cor-
rectly
and safely (local refuse sites).
KETTLER International Inc. · 1355 London Bridge Road · VA 23453 USA
www.kettlerusa.com
4