How to operate your Friedrich room air conditioner
To remove filter
The diagram below is a guide to fi lter replacement. Simply
turn the unit off, and pull the fi lter frame up and toward you.
Clean with warm water and a mild de ter gent, rinse, dry,
and replace by sliding the fi lter back into po si tion behind
the front panel.
4
All manuals and user guides at all-guides.com
To start unit
If your air conditioner is installed and plugged into a proper
receptacle, it is ready to go.
Function control
The left hand knob has fi ve positions:
Turn to OFF to turn everything off.
Turn to Hl COOL for highest fan speed for maximum
cooling.
Turn to LOW COOL for low fan speed and quiet operation
when max i mum cooling is not required.
The Hl FAN setting provides maximum circulation of
fi ltered room air with out cooling.
The LOW FAN setting is a slow fan speed without
cooling.
Temperature control
The right hand knob is the thermostat - turn it clockwise for
cooler air, counterclock wise for warmer air.