Dreame P10 Manual Del Usuario página 12

Charging
EN
Note:
• The vacuum cannot be used while charging.
• Fully charge the vacuum before using it for the first time. This will take about 2.5 hours.
• Vacuuming at Turbo mode for a prolonged period will cause the battery to heat up,
which increases charging time. Allow the vacuum to cool down for 30 minutes before
charging it.
Display Screen
Battery Status Indicator
• Red: Battery Level ＜ 20%
• White: Battery Level ≥ 20%
Battery Indicator
The battery indicators flash and then turn bright constantly in sequence depending on the
battery condition.
Note: Once the vacuum is fully charged, the screen will turn off after 30 seconds.
8