Cleaning The Hepa Filter - Dreame P10 Manual Del Usuario

Care & Maintenance
EN

Cleaning the HEPA Filter

It is recommended to clean the HEPA filter once every 4 to 6 months.
1. Remove the dust cup as shown in the
figure.
3. Clean the HEPA filter with clean water.
Make sure you rotate the HEPA filter 360° to
thoroughly and remove all dust caught in
the filter. Lightly tap the filter several times
to remove any excess dirt.
Note:
• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the HEPA filter with a brush or finger.
14
12
11 1
10 2
24 hrs
9 3
8 4
7 5
6
2. Remove the HEPA filter from the vacuum by
pulling it down in the direction shown in the
figure.
4. Allow the HEPA filter to air dry for 24 hours.