Harbor Breeze TG44LW3D1RS Manual De Instrucciones página 8

INITIAL INSTALLATION
5. Remove 6 motor screws (H) and 6 lock washers (I)
from top of motor housing (D). Remove the yoke
plate and top plate from motor housing (D).
6. Slide one blade (J) through one of the rectangular
openings on center band of motor housing (D).
Align holes in blade (J) with holes in blade arm
located inside of motor. Attach blade (J) with 3
blade screws (AA) and fiber washers (BB).
Repeat for remaining blades (J).
Note: Make sure to completely secure each blade
(J) before proceeding to the next.
Hardware Used
AA
Blade Screw
BB Fiber Blade Washer
7. Reattach top plate and yoke plate to motor
housing (D) with lock washers (I) and motor
screws (H) previously removed in Step 5.
5
6
blade
arm
x 9
x 9
7
8
H
yoke plate
I
top plate
D
AA
BB
H
yoke plate
I
top plate
D
J