Establishing A Connection Via Wlan Router - Oase FM-Master WLAN Instrucciones De Uso

- EN -
6.4

Establishing a connection via WLAN router

Prerequisite:
The range of the WLAN connection between the router and FM-Master WLAN can span a distance of up to 80 m
provided there is unobstructed signal transmission and no sources of interference.
Compatibility with the following WLAN standards:
FM-Master WLAN: 802.11b
FM-Master WLAN EGC: 802.11n+g+b
The connection can be established in three different ways:
Connection via WPS by pressing a button
Connection using the Oase FM-Master app via WPS (→ Establishing a connection to the WLAN router via WPS)
Manual connection using the Oase FM-Master app (→ Manually establishing a connection to the WLAN router)
Connection via WPS by pressing a button
A secure connection is established with WPS (Wi-Fi Protected Setup) by pressing a button on the WLAN-
Router and on the FM-Master WLAN.
It is not necessary to enter the SSID and password.
The WLAN router must support WPS.
How to proceed:
On the router:
1. Press the WPS button on the router to activate WPS.
Follow the information given in the router operating instructions.
WPS is only active for a limited time. Activate WPS on the FM-Master WLAN during this time.
 J
On the FM-Master WLAN:
2. Insert the service pin into the opening between the two top sockets until you feel a resistance. The pin is in
contact with the service button.
3. Press the service button briefly (max. 2 seconds) to activate the WPS.
The LED is lit green and flashes fast.
The WPS remains active for 2 minutes.
The connection is established when the green LED flashes slowly (2 seconds on, 1 second off).
On the smartphone/tablet:
4. Establish a connection to the WLAN router.
5. Start the ʺOase FM-Masterʺ app.
50