Adding An Egc-Compatible Device - Oase FM-Master WLAN Instrucciones De Uso

7.11

Adding an EGC-compatible device

"My devices" screen
A maximum of 10 EGC devices or devices with hand-held transmitters can be added to the FM-Master WLAN.
How to proceed:
1. Tap to open the list with available OASE devices.
When the list is opened, the FM-Master WLAN automatically searches for connected EGC devices. The
EGC devices must be correctly connected to the EGC network and switched on so that the FM-Master
WLAN can find the EGC devices. Found devices are displayed in colour in the list and the message "De-
vice found" is shown underneath the product name.
EGC-compatible devices are marked with the EGC logo (Easy Garden Control) in the product image.
To search for connected EGC devices again, tap
2. Select the desired EGC-compatible device in the list.
Only EGC devices found by the FM-Master WLAN in the EGC network can be added.
For information on the device, tap . If the following prompt is confirmed with "OK", the OASE homepage
with the relevant product information opens in your browser.
3. Tap to add the device.
The device has been added to the device list.
4. To give the added device a name, switch to the device overview.
5. Select the desired device in the device overview and tap
A dialogue field will open.
6. Enter the device name and confirm with "OK".
The device name has been assigned.
N O T E
If there are several devices of one type, repeat the process for each device.
.
.
- EN -
65