De Dietrich GV23 Manual Del Usuario página 7

English
C 230 ECO : Setting the burner parameters
Press the key until #CONFIGURATION is displayed.
Successively press until #BOILER is displayed, then on
MAX.VENT., MIN.VENT. and ST.VENT. are displayed.
If the boilers are in cascade, press the
with K3 control panels.
The parameters can be modified with the + and - keys.
GSR 230 Condens: Setting the burner parameters
- Open the flap.
- Press the key until #PARAMETERS is displayed.
- Turn the rotary button to select #CONFIGURATION. Press the
rotary button successively until MAX.VENT., MIN.VENT. and
ST.VENT. are displayed.
The parameters can be modified by turning the rotary button.
Access to these parameters is only possible one minute after
the appliance has been switched on and as long as no faults are
detected.
Setting value CO - Propane (G31)
2
• Low speed
Fan rotation speed
Boiler type
C230-85 ECO /
GSR 233 Condens
C230-130 ECO /
GSR 234 Condens
• High speed
Fan rotation speed
Boiler type
C230-85 ECO /
GSR 233 Condens
C230-130 ECO /
GSR 234 Condens
03/07/08 - 300015337-001-A
key for the boilers fitted
CO
MIN.VENT.
rpm %
1500 10.5 ±0.5
1400 10.5 ±0.5
CO
MAX.VENT.
rpm %
5200 10.0 ±0.7
6100 10.0 ±0.7
C 230 ECO / GSR 230 Condens
Overpressure cascade combined with propane
(G31)
until • Low speed - Cascade with overpressure combusted gases
50-80 Pa
Boiler type
C230-85 ECO /
GSR 233 Condens
C230-130 ECO /
GSR 234 Condens
• High speed - Cascade with overpressure combusted gases
50-80 Pa
Boiler type
C230-85 ECO /
GSR 233 Condens
C230-130 ECO /
GSR 234 Condens
• Rotation at start-up - G31 and cascade de gaz brûlés à
2 surpression
Boiler type
C230-85 ECO /
GSR 233 Condens
C230-130 ECO /
2
GSR 234 Condens
Fan rotation speed
MIN.VENT.
rpm
50 Pa 80 Pa
1800 2000
1900 2100
Fan rotation speed
MAX.VENT.
rpm
50 Pa 80 Pa
5200
6100
Fan rotation Fan rotation
speed speed
ST.VENT. ST.VENT.
0 Pa 50 Pa
rpm rpm
2000 2200
2000 2300
CO
2
%
10.0 ±0.5
10.0 ±0.5
CO
2
%
10.0 ±0.7
10.0 ±0.7
Fan rotation
speed
ST.VENT.
80 Pa
rpm
2400
2500
7
7