Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Piston Ring Compressor, Durchmesser: 53 - 175 mm, Höhe: 101 mm (4")
2
Piston Ring Compressor, Durchmesser: 53 - 175 mm, Höhe: 89 mm (3-1/2")
3
Piston Ring Compressor, Durchmesser: 53 - 175 mm, Höhe: 76 mm (3")
4
Square Wrench for Piston Ring Compressor
5
Double Angled Screwdriver, 6 mm Slot / Philips PH2
6
Ring Groove Cleaner, 51 - 127 mm (2" - 5")
7
Cleaning Blade, 1.2 - 5.5 mm
8
Cleaning Blade, 1/16" - 3/16"
9
Cleaning Blade, 2.0 - 4.5 mm
10 Piston Ring Assembly Pliers, 50 - 100 mm
ALLGEMEINE INFORNMATION
Dieser Kolbenring-Werkzeugsatz dient der Reinigung von Kolbenringnuten, der Montage von
Kolbenringen auf Kolben und zum Vorspannen der Kolbenringe bei der Montage der Kolben.
IMPORTANT INFORMATIONS
-
Be careful when installing piston rings. Excessive stretching can cause fracture of the piston rings.
-
Observe the installation position of the piston rings. An incorrectly assembled piston ring can lead
to reduced engine power, increased wear, excessive oil consumption and engine damage.
-
Please note the correct installation position of the piston. Notes of the vehicle manufacturer must
be observed.
-
Lubricate the cylinder face and pistons before assembly with engine oil.
-
Do only use a plastic hammer or hammer handle when mounting the piston. Knocking carefully
with the hammer handle on the piston crown after tensioning of the piston rings.
-
Please note that the piston rings are completely pressed and not above the piston.
-
Piston rings on 2- stroke engines are secured against rotation by a pin in the piston ring groove.
Make sure that the piston ring is securely in the correct position.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
Piston Ring Compressor Set
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
BGS 1890
L
d . l h
a t s
w
s
@
o f n i
: l i
Publicidad
Tabla de contenido
