Maxi-Cosi CabrioFix i-Size base Instrucciones De Uso página 39

A - Car seat release button with indicator for
correct installation
B - Support leg indicator for correct
installation (L+R)
C - Support leg
D - Adjuster button for support leg
E - Storage compartment for user manual
F - ISOFIX release buttons with indicator for
correct installation (L+R)
G - ISOFIX connectors (L+R)
H - Lever for ISOFIX connector length
adjustment
I - Anchor points for securing seat
SAFETY
The car seat base is developed for an intensive
use of approximately 6 years.
CabrioFix i-Size base car use
• Unfold the support leg (C) and place the base
on the vehicle seat. Pull the ISOFIX connectors
(G) outwards by simultaneously pulling the lever
for ISOFIX connector length adjustment (H).
• Connect the ISOFIX connectors (G) with
the ISOFIX anchorage points in the back of
the vehicle seat. An audible 'CLICK' confirms
the connection is secure. Now push the base
towards the backrest of the vehicle seat as far
as possible.
• Place the support leg (C) in the most forward
position. Press the support leg adjuster button
(D) and adjust to the correct length by pulling
the lower part of the support leg down. Make
sure the support leg is stable and firmly
positioned on the vehicle floor. The indicator (B)
on the side of the support leg turns green when
the installation is secure.
WARNING:
Install the car seat base only on a forward
facing vehicle seat.
Installing CabrioFix i-Size car seat
• Connect the mounting bars onto the base until
they lock onto the base by means of an audible
'CLICK'. Make sure the indicator located on the
car seat release button (A) has turned green.
• To release CabrioFix i-Size from the CabrioFix
i-Size base, first press the car seat release
button (A) and then pull it towards the front
of the base. Remove CabrioFix i-Size from the
base.
WARNING:
• Never install CabrioFix i-Size in forward facing
position onto the CabrioFix i-Size base in the car.
• Do not install the CabrioFix i-Size base with
CabrioFix i-Size on it in the area of airbag
deployment.
• The safety of your child for not complying
with the installation and instruction manual is
not guaranteed.
CARE
The base can be cleaned using a wet cloth.
I
Maxi-Cosi CabrioFix i-Size base 40cm-75cm / 0-12 M
EN
I
39