Important Safety Instructions - EGO CH5500E Manual Del Usuario

◾
Do not disassemble the charger. Take it to an
authorized service technician when service or repair is
required. Incorrect reassembly may result in a risk of
electric shock or fire.
◾
Unplug the charger from the electrical outlet
before attempting any maintenance or cleaning
to reduce the risk of electric shock.
◾
Disconnect charger from the power supply
when not in use. This will reduce the risk of electric
shock or damage to the charger if metal items should
fall into the opening. It will also help prevent damage
to the charger during a power surge.
◾
Risk of electric shock. Do not touch the uninsulated
portion of output connector or uninsulated battery
terminal.
◾
Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.

IMPORTANT SAFETY INSTRUCTIONS

◾
Save these instructions. This manual contains
important safety and operating instructions for 56V
Rapid Charger CH5500E.
◾
Before using the battery charger, read all
instructions and cautionary markings on the
battery charger, the battery and the product
using the battery.
WARNING:
When using electric appliances, basic
precautions should always be followed, including the
following.
◾
To reduce the risk of injury, close supervision is
necessary when an appliance is used near children.
◾
Only use attachments recommended or sold by
manufacturer.
◾
Do not use outdoors.
◾
For a portable appliance – To reduce the risk of
electrical shock, do not put charger in water or other
liquid. Do not place or store appliance where it can fall
or be pulled into a tub or sink.
CAUTION:
To reduce the risk of injury, charge
only lithium-ion rechargeable batteries. Other types of
batteries may burst, causing personal injury or damage.
SPECIFICATIONS
Charger Input 220-240 V~50 Hz, 550 W
Charger Output
5-8 A 56 V
Approximately 25 minutes for
BA1120E battery pack
Approximately 30 minutes for
BA1400/BA2240E/BA1400T/
BA2240T/BA2242T
battery pack Approximately 40
minutes for BA2800/BA2800T
battery pack
Approximately 45 minutes for
Charging Time
BA3360 battery pack
Approximately 60 minutes for
BA4200/BA4200T battery pack
Approximately 190 minutes for
BAX1300 battery pack
Approximately 70 minutes for
BA5600T battery pack
Approximately 90 minutes for
BA6720T battery pack
Optimum Charging
5 °C-40 °C
Temperature
1.9 kg
Charger Weight
DESCRIPTION
KNOW YOUR CHARGER (Fig. A)
1. Mounting Slot
2. Cooling Air Port
3. LED Indicators
4. Electrical Contacts
5. Soft Grip
6. Wall Mounting Hole
OPERATION
HOW TO CHARGE THE BATTERY PACK
WARNING:
Do not use the charger outdoors or
expose it to wet or damp conditions. Water entering the
charger will increase the risk of electric shock.
NOTICE:
Lithium-Ion battery packs are shipped partially
charged. Before using it the first time, fully charge the
battery pack.
1. Connect the charger to the power supply
(220-240V~, 50Hz). The four charging indication LEDs will
briefly shine green, indicating that the charger is working
correctly.
2. Align the raised ribs of the battery pack/adaptor with
the mounting slots in the charger; slide the battery
pack/adaptor down onto the charger (Fig. B).
56 VOLT RAPID CHARGER — CH5500E
EN
5