Advanced Settings; Changing The Tv's Video Input Together With The Unit's Input (Input Sync: Sony Tv Only) - Sony RHT-S10 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Advanced Settings

Changing the TV's video
input together with the
unit's input (Input SYNC:
Sony TV only)
You can set the remote so that the TV's video
input switches when you change the unit's input
with the remote.
Note
• Do not use the Control for HDMI function while the
Input SYNC function is active for buttons other than
TV (white) and DMPORT.
For details, see ""BRAVIA" Sync Features"
(page 27).
TV
(orange)
Input
buttons
(TV, BD/
DVD, SAT,
AUDIO)
Input
buttons
(LINE IN,
FM,
DMPORT)
1
Select the input button to which you
want to assign Input SYNC.
For TV, BD/DVD and SAT
Press TV (orange) while holding down the
input button (TV (white), BD/DVD, SAT)
for the component you want to operate.
For example, if you are going to operate a
DVD player, press BD/DVD.
The input button you pressed flashes.
For LINE IN, FM and DMPORT
1 Press TV (orange) while holding down
AUDIO.
2 Press the input button (LINE IN, FM,
DMPORT) for the component you want
to operate.
2
Check the table below for the remote
button number corresponding to the TV
input jack you have connected to, and
press the number.
The input button (TV, BD/DVD, SAT,
AUDIO) lights up when you press the
number button.
TV input jack*
VIDEO 1
VIDEO 2
VIDEO 3
VIDEO 4
VIDEO 5
Number
buttons
VIDEO 6
VIDEO 7
ENT
VIDEO 8
COMPONENT 1
COMPONENT 2
COMPONENT 3
COMPONENT 4
HDMI 1
HDMI 2
HDMI 3
HDMI 4
HDMI 5
TV program**
None
* TV input jack name may differ depending on
your TV model.
** This setting switches from the current input to
TV program. It is assigned to the TV (white)
button by default.
Remote Button
(codes)
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
20
continued
31
US

Publicidad

Tabla de contenido
loading

Tabla de contenido