Control Elements - Dometic MSI924M Instrucciones De Montaje Y De Uso

Technical description
I
NOTE
The individual values are found in the chapter "Technical data" on
page 22.
7.1

Control elements

The inverter has the following connections, displays and control elements on the
back:
No. in
fig. 4,
Designation
page 4
1 Terminal
2 RS-232 port,
REMOTE port
3 POS+
4 NEG–
5 Earth terminal
The inverter has the following connections, displays and control elements on the
front:
No. in
fig. 5,
Designation
page 4
1 Main switch
"ON/OFF/REMOTE"
switch:
2 "Input Level" LED
3 "Load Level" LED
4 Dip switch
5 Safety socket
12
Description
Setup operation via remote control
Connection of a PC using a serial RS-232 interface or
connection of the MCR9M remote control
Positive terminal
Negative terminal
Earthing on the vehicle bodywork, not needed for
truck installation
Description
Switches the device on, off or to operation via the
remote control (accessory)
Displays the input voltage range
Displays the power being supplied
Makes settings on the inverter (such as mains voltage,
mains frequency, energy-saving mode).
220 V output
MSI924M
EN