Control Elements - Dometic Waeco SinePower MSI2312T Instrucciones De Montaje

Technical description
The inverter can be easily controlled using the remote control (accessory).
7.1

Control elements

Control elements of the inverter (fig. 5, page 4)
Item Description
1 Dip switch
2 LED
3 Main switch
"ON/OFF/
REMOTE" switch:
4 Fuse
7.2 Connections
Connections of the inverter (fig. 5, page 4)
Item Description
5 AC input
6 AC output
7 Earth terminal
8 POS+
9 CAN1 and CAN2 port
10 Green terminal
11 RS232 port, REMOTE port
12 NEG–
13 LCM
38
Description
Makes settings on the inverter (such as
mains voltage, mains frequency, energy-
saving mode).
See chapter "Status indications" on
page 45
Switches the device on, off or to opera-
tion via the remote control (accessory)
Protects the inverter from overload.
The fuse can be pressed in again once it
has triggered.
Description
230 Vw input jack
230 Vw output jack
Earthing on the vehicle body-
work
Positive terminal
CAN BUS connections
Setup of remote control and
parallel operation
Serial RS232 port for connect-
ing to a PC
Negative terminal
Remote control connection
SinePower
EN