Stitch Length Control (How To Adjust Stitch Length); Adjusting Stretch Stitch Balance; Reverse Stitch Control - Sears Singer 384.18028300 Manual De Instrucciones

Stitch Length Control
( howto adj
ust the stitche
length)
Turn the stitch length control until the desired number is
shown at the indicating mark.
(Set the stitch length control ar S.S. when using the stretch
stitch.) The larger the number, the greater the stitch length.
_._==_,',_ mark shows the adjustment range when sewing the
buttonhole.
* Raise the presser foot before turning the stitch length
control.
Indicating mark
S
Adj usting
Stretch Stitch Balance
If stretch stitch patterns are uneven when you sew on a
particular fabric, adjust them with the feed balancing dial.
To adjust distorted patterns.
If patterns are drawn out, correct by turning the dial in
the direction of "-".
If patterns are compressed, correct by turning the dial
in the direction of"+".
Reverse Stitch Control
Sewing wilt be made in reverse while the reverse stitch
control is pressed.
S
J
J
J
28