How To Adjust Buttonhole Stitch Density - Sears Kenmore 385.16020100 Manual De Instrucciones

If the button is extremely thick, make a test buttonhole.
If it is difficult to fit the button through the test buttonhole,
lengthen the buttonhole by pulling the button holder back to
create a gap _1_.
_1_ Gap
S
\
• How to adjust buttonhole stitch density
Use the stitch length control (_0to adjust stitch density.
Turn the dial in direction _for a looser density_.
Turn the dial in direction (_for a tighter density _).
f
J
LENGTH \ \
\
\
J
If the sides of the buttonhole are not balanced, do the
following:
• If the buttonhole looks like (_, use the screwdriver to
move the lever to the right (+) to make the right side
of the buttonhole less dense (see illustration).
• If the buttonhole looks like (_, use the screwdriver to
move the lever to the left (-) to make the right side of the
buttonhole denser.
Buttonhole pitch balance adjusting lever
F-
(_ \\
\,
J
J
80