How To Adjust Buttonhole Stitch Balance - Sears Kenmore 385.17624 Manual De Instrucciones

How to Adjust Buttonhole Stitch Balance
Use the stitch length control (_ to adjust stitch density.
Turn the dial in direction (_ for a coarser density Q.
Turn the dial in direction _) for a tighter depsity (_).
r
LENGTH
If the sides of the buttonhole are not balanced, do the
following:
-- If the buttonhole looks like Q, move the lever with the
screw driver to the right ( + ) to make the right side of
the buttonhole tess dense (see illustration)_
-- lfthe buttonhole looks like(_, movethe lever with the
screw driver to the left ( - ) to make the right side of
the buttonhole denser.
(_) Buttonhole pitch balance adjusting lever
r
®
@
D
-- -t-
78