Security Class; Storage And Transportation - Duronic IRT3W Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
Type of protection against electric shock: internally powered equipment.
Degree of protection against electric shock:
Degree of protection against ingress of water: IP22
Safety degree of using in flammable anaesthetic gas blending with air,
oxygen or nitrous oxide: Non-AP/APG
No application parts of the thermometer prevents defibrillation charge
effect.
No application parts of the thermometer output signal.
The thermometer is impermanent installed device.
The thermometer can be transported using general transportation tools.
Severe vibration, shock, or rain must be avoided during transportation.
The thermometer must be packaged and then stored in a well-ventilated
room without corrosive gas. The ambient temperature must be between
-20°C and +55°C(-4°F - 131°F), the relative humidity must be lower than
95% (non-condensing), and the atmospheric pressure must be 50 - 106
kPa.
EMC Information/Guidance and Manufacture's Declaration
CAUTION
The Infrared Thermometer IRT3W needs special precautions
regarding EMC and needs to be installed and put into
service according to the EMC information provided for in the
ACCOMPANYING DOCUMENTS.
Portable and mobile RF communications equipment can affect
Infrared Thermometer IRT3W.
The Infrared Thermometer IRT3W should not be used adjacent to or
stacked with other equipment.

Security Class

Storage and Transportation

28
Type BF applied part.

Publicidad

Tabla de contenido
loading

Productos relacionados para Duronic IRT3W

Tabla de contenido