General Safety Instructions For Power Tools; Work Area Safety; Electrical Safety - Grizzly Tools ART 4032 Lion Traducción Del Manual De Instrucciones Original

Remove the battery prior to ser-
vicing the appliance.
Noise level rating L
Electrical appliances must not be
disposed of with the domestic waste.
Cutting circle
Pivoting cutter head
Symbols in the manual
Warning symbols with information
on damage and injury prevention
Instruction symbols (the instruc-
tion is explained at the place of the
exclamation mark) with information
on preventing damage
Help symbols with information on
improving tool handling.
General safety instructions for
power tools
WARNING! Read all safety direc-
tions and instructions. Omis-
sions in the compliance with safety
directions and instructions can
cause electrical shock, fire and/or
severe injuries.
Retain all safety directions and instruc-
tions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated pow-
er tools (with power cord) and to battery-
operated power tools (without power cord).
in dB
WA

1) WORK AREA SAFETY

a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in ex-
plosive atmospheres, such as in the
presence of flammable Iiquids, gas-
es or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.

2) ELECTRICAL SAFETY

a) Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool out-
doors, use an extension cord suitable
for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of elec-
tric shock.
f) If operation of the electric device in
a damp environment is inevitable,
please use a fault-current circuit
breaker. The use of a fault-current
GB
47