Personal Safety - Grizzly Tools ART 4032 Lion Traducción Del Manual De Instrucciones Original

GB
circuit breaker reduces the risk of elec-
trocution.

3) PERSONAL SAFETY

Please note that children, indivi-
duals with limited physical, sen-
sory or mental capabilities, tho-
se with insufficient experience
or knowledge or individuals who
are not familiar with the instruc-
tions must never be permitted to
use the machine. Local regulati-
ons may specify an age restriction
for the user.
a) Stay alert, watch what you are doing
and use common sense when operat-
ing a power tool. Do not use a power
tool while you are tired or under the
influence of drugs, alcohol or medica-
tion. A moment of inattention white op-
erating power tools may result in serious
personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid
safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energising power tools
that have the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotat-
ing part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper foot-
ing and balance at all times. This ena-
48
bles better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from mov-
ing parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g) If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used. Use of dust collec-
tion can reduce dust-related hazards.
.h) Never let children or persons who are
unfamiliar with these instructions use
the machine.
i) Stop using the machine when persons
– especially children – or pets are
nearby.
j) Use the machine only in daylight or
with good artificial lighting.
k) Always keep your hands and feet
away from the cutting equipment, es-
pecially while starting the engine.
l) Never install metallic cutting elements.
m) Prior to commissioning and after any
impact, check for signs of wear and
damages, and have any necessary
repairs performed.
n) Never use the machine with damaged
or missing protective equipment.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool