Safety Instructions - Duronic MG301 Manual De Instrucciones

Safety Instructions

Read these instructions carefully and retain for future reference.
• The MG301 meat grinder is for indoor/household use. Do not use outdoors.
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appli-
ance by a person responsible for their safety.
• Children should be closely supervised at all times to ensure that they do not play
with the appliance.
• Do not operate this appliance if the power cable or plug is damaged. If either is
damaged return it to Duronic for service or repair by professional technician.
• Never try to replace the parts and repair the unit by yourself.
• When the circuit breaker activates, do not switch on the appliance. Let the grinder
rest for 5 minutes before pressing the 'ON' button to resume grinding.
• Do not have the machine grinding meat for more than 10 minutes. If you need to
continue grinding over 10 minutes, allow the machine to rest for 10 minutes before
continuing. 10 minutes on / 10 minutes off.
• Do not let the power cable hang over the edge of a table or counter.
• Ensure that the power cable is not in a position where it can be pulled or tripped
over accidentally.
• Do not allow the power cable to touch hot surfaces; do not place the cable near hot
gas or electric burners or near a heated oven.
• Use of an extension lead with this appliance is not recommended. However, if it is
necessary to use an extension lead, ensure that the extension lead is equal to or
greater than the power consumption of the appliance to avoid overheating of the
appliance and extension lead. Do not use any other appliance on the extension
lead at the same time. Do not place the extension lead in an unsafe position where
it can be pulled on by children or animals or be tripped over.
• Always operate the grinder on a dry, smooth, even and stable surface. Do not
place the unit on a hot surface.
• Choose a location for the grinder that allows air to pass under the bottom. The
sides of the machine should be kept clear and not blocked by any other items.
6
DURING USE
• Before first use, ensure you remove all of the packaging and any labels.
• When carrying the unit, be sure to hold the body securely from the base with both hands. Do
not carry the unit by the hopper plate or head.
• Never push food into the grinder by hand. Always use the food pusher.
• Do not use the MG301 to grind hard food such as nuts and bones; always ensure that bones
and rind are removed from meat before mincing.
• Do not grind ginger and other foods with hard fibre content.
• Operate the grinder from "ON" to "REV" or from "REV" to "ON". It is very important to let the
grinder stop before you press another button. We recommend to wait 30 seconds before
pressing the opposite button.
• To avoid jamming, do not force food into the grinder with excessive pressure.
• Do not fix the cutting blade or cutting plate onto the grinder when using kibbe attachment.
• Always switch off and unplug from the mains power outlet when not in use.
CLEANING AND MAINTENANCE
• Before cleaning, ensure that the machine is unplugged from the mains power outlet.
• Unplug when assembling and disassembling the unit; always unplug when changing attach-
ments.
• After the blade is used each time, rinse under warm water and wipe it dry.
• To preserve the quality of your blade, apply a small amount of cooking oil onto a tissue and
wipe the blade with it.
• Accessories cannot be cleaned with dishwasher – If any parts are put into the dishwasher it
will ruin the parts and render them useless.
• Do not immerse power cable or the body of grinder into water as this would give create an
electric shock.
• To clean the body of the machine safely, unplug from the mains power and use a damp cloth
to clean the machine. After cleaning dry thoroughly with a dry cloth.
7