Components
Product Specifications
1.
Kibbe set
2.
Kibbe plate
3.
Sausage attachment (Large)
4.
Sausage attachment (Medium)
5.
Sausage attachment (Fine)
6.
Cutting plate(Fine)
7.
Fixing ring
8.
Cutting plate(Medium)
9.
Cutting plate(Large)
10.
Cutting blade
11.
Feed Screw
Model Name
Voltage
MG301
220 - 240V
12.
Head
13.
Head inlet
14.
Locker
15.
ON switch
16.
OFF switch
17.
REVERSE switch
18.
Plug & power cable
19.
Machine Body
20.
Hopper plate
21.
Food pusher
Rated Power
Frequency
1200W
50/60Hz
8
Before First Use
Before first use please do the following:
•
Check the voltage indicated on the rating label of the grinder corresponds with the mains
voltage in your home.
•
Remove all packaging and labels.
•
Wash all parts (except the main body of the machine) in warm soapy water. Ensure they are
dry before re-assembling them together again.
•
Wipe clean the main body of the machine with a damp cloth, ensuring you then wipe dry
afterwards.
•
Before you plug in the machine, make sure the power switch is in the 'OFF' position.
Assembly
Step 1: Hold the head(12) and
insert it into the head inlet(13).
Step 3: Place the feed screw(11)
into the head, long end first, then
turn slightly until it set into place
inside the machine.
Step 2: Press the locker(14)
downwards, then rotate the head
anti-clockwise to fasten the head
tightly into place.
Step 4: Place the cutting blade(10)
onto the feed screw(11) with
the blade facing the front as
illustrated. If it is not fitted properly,
meat will not be grinded.
9