Using The Whisk Attachment - Duronic HB8010 Manual De Instrucciones

The whisk attachment is suitable for whipping cream, beating egg whites, mixing
sponges and ready-mix desserts.
1. Make sure the motor unit is unplugged.
2. Insert the metal end of the whisk into its
housing.
3. Attach the motor unit to the whisk housing
and push to lock into place.
4. Place ingredients into a deep mixing bowl
or container to prevent spattering.
5. Plug the motor unit into the mains socket.
6. Insert the whisk into the mixing bowl until
the whisk touches the bottom.
7. Turn the variable speed dial to set the
desired speed.
8. Turn on the motor unit by keeping the speed button pressed.
»
you can also press the Turbo button to run the appliance for intermittent bursts.
9. Keep the motor unit in the upright position and slowly circulate the whisk
around the mixing bowl.
10. After you have completed whisking, release the speed button and unplug
the motor unit from the mains socket.
11. Press the attachment release buttons and remove the whisk housing from
the motor unit. The whisk can be removed from its housing for cleaning
by pulling on the base of the whisk.

Using the Whisk Attachment

11