Using The Chopper Attachment - Duronic HB8010 Manual De Instrucciones

The chopper attachment is suitable for chopping meat, cheese, onions,
herbs, garlic, carrots, etc.
1. Make sure the motor unit is unplugged.
2. Carefully insert the chopper blade
over the pin at the centre of the
chopper bowl.
4. Attach the motor unit into the attachment point on top of the chopper lid and push
to lock into place.
5. Plug the motor unit into the mains socket.
6. Turn the variable speed dial to set the desired speed.
7. Hold the chopper bowl and turn on the motor unit by keeping the speed button
pressed.
»
Running the chopper continuously will yield smoother food consistency while
pulsing will yield chunkier results.
» You can also press the Turbo button to run the appliance for intermittent bursts.
8. When the desired food consistency has been reached, release the speed button

Using the Chopper Attachment

3. Put food into chopper bowl. Place lid
on chopper bowl, fitting securely over
pin at the centre. Turn the lid clock-
wise until it locks into place.
•
Align the tabs on the lid and
notches on the bowl.
•
If chopping meat, cut it into
cubes before putting into
chopper bowl.
12