Assembling The Blender; Using The Blender - Duronic BL5 Manual De Instrucciones

1. Before first use, remove all packaging and set aside.
2. Clean the jug for the first time as per the instructions in this manual.
3. Place the blender on a flat, dry surface and close to an electrical mains
socket.
4. Plug in the cable to a mains socket.
1. Open the jug lid and place the ingredients inside.
2. Fill up the jug to no more than the max level mark on the jug body.
3. If adding solid foods such as fruit and vegetables, add a wet ingredient like
milk or water.
4. Place the lid on the jug and then put the jug onto the blender base,
ensuring that the jug lock is in the right position.
5. Switch on at the socket. You are now ready to blend your mixture.
Option 1 (Pulse):
Option 2 (Speed 1 and 2):
6. After you have finished blending, hold the jug handle and turn it anti-
clockwise to unlock it from the base.
7. Place the jug on a flat surface, open the lid and pour the juice out.

Assembling the Blender

Using the Blender

Turn and hold the dial to the "P" position,
the machine will start to work in pulsing your
mixture quickly. Release the dial the machine
will stop.
Turn the dial to speed 1 or 2, and the machine
will start continually work without you needing
to keep hold of the dial. When you've finished
blending, turn the dial back to the "0" position.
8