Publicidad
Idiomas disponibles
Idiomas disponibles
IMPORTANT SAFETY ADVICE.-
PRECAUTIONS.
This bicycle has been designed and constructed to
provide maximum safety. Nevertheless, certain
precautions should be taken when using exercise
equipment.
Read
assembling and using the bicycle. It provides you
with important information about assembly, safety
and use of the machine.
The following safety precautions should also be
observed:
1
Keep children away from this equipment at all
times. DO NOT leave them unsupervised in the
room where this bicycle is kept.
2
It can only be used by one person at a time.
3
If you experience dizziness, nausea, chest pains
or any other symptom while using this appliance
STOP the exercise. SEEK MEDICAL ATTENTION
IMMEDIATELY.
4
Use the appliance on a level, solid surface. DO
NOT use the bicycle outdoors or close to water.
5
Keep your hands well away from any of the
moving parts.
6
Wear clothing suitable for doing exercise. Do not
use baggy clothing that might get caught up in the
bicycle. Always wear running shoes or trainers
when using the machine. Make sure all laces/cords
are tied correctly.
7
This appliance must only be used for the
purposes described in this manual. DO NOT use
accessories that are not recommended by the
manufacturer.
8
Do not place sharp objects near the machine.
9
Disabled people should not use the machine without
the assistance of a qualified person or a doctor.
10
Do warm up stretching exercises before using
the equipment.
11
Do not use the bicycle if it is not working
correctly.
Caution: Consult your doctor before beginning
to use the bicycle. This advice is especially
important for those over 35 or suffering from
health problems.
Keep these instructions safe for future use.
GENERAL INSTRUCTIONS.-
1 This unit has been designed for professional use.
The weight of the user must not exceed 150 kg.
2 Parents and/or those responsible for children should
always take their curious nature into account and how
this can often lead to hazardous situations and
behaviour
resulting
circumstances should this appliance be used as a toy.
3 The owner is responsible for ensuring that
anyone who uses the machine is duly informed
about the necessary precautions.
the
whole
manual
in
accidents.
Under
English
ASSEMBLY INSTRUCTIONS.-
The
assistance
recommended when assembling this unit.
Take the unit out of its box and make sure that all of
the pieces are there (Fig. 1):
before
(16) Main body; (18) Handlebar; (17) Handlebar
stem; (10) Saddle post; (12) Horizontal saddle tube;
(13) Saddle; (4) Rear stabiliser bar with adjustable
feet; (15) Front stabiliser bar with wheels; (1L) Left
pedal; (1R) Right pedal; (3) Bolt M-10; (5) Flat
washer M-10; (22) Bottle holder; Wrench
For H921E: (89) Monitor holder; (90) Monitor
1. Position the machine's rear stand on the rear
stabilizer bar (4), as shown in Fig.2, insert the bolts
(3), fit the flat washers (5) and then tighten
securely.
2. Position the front stabiliser bar with wheels (15)
and with the wheels facing forwards, as shown in
Fig.2, insert the bolts (3), fit the flat washers (5) and
tighten securely.
3. Attach the bottle holder (22) using the screws
(43), Fig.2.
FITTING THE HANDLEBAR.-
Insert the handlebar stem (17) into the hole on the
main body (16), Fig.3. Position it correctly and then
tighten knob (84) by turning it clockwise.
Position the handlebar (18) on the handlebar stem
(17), Fig.3, tighten the knob (19) with the circular
gasket (20).
ADJUSTING THE HANDLEBAR HORIZONTALLY.-
Position the handlebar (18) at a comfortable
distance for doing exercise, now tighten knob (19)
securely, Fig.3.
ADJUSTING THE HANDLEBAR VERTICALLY.-
Position the handlebar (18) at a comfortable
distance for doing exercise, now tighten knob (84)
securely, Fig.3.
Stay within the references.
FITTING THE MONITOR.-
Using a cross screwdriver and the screws (92)
attach the computer holder (89) to the handlebar
(18). Install the computer (90) into the holder (89).
Connect the sensor wires (A1&A2).
ATTACHING THE SADDLE.-
Insert the saddle post (10) into the boss on the
main body (16), position it correctly and tighten the
saddle post by using the adjustment knob (84A),
Fig.4, turning it clockwise.
no
Next insert the horizontal saddle tube (12) through
the hole on the saddle post (10), Fig.4, position it
correctly and tighten the knob (84), Fig.4.
Fit the saddle bracket (13), Fig.4, onto the
horizontal saddle tube (12), as shown in Fig.4, fit
7
of
a
second
person
is
Publicidad
