Fossil JS15 Manual Del Usuario página 3

chronograph hands by one increment/decrement . Or press
and hold A or B for fast increment/decrement .
3 . When both hands are in the zero position, reset time and
return crown to position 1 .
NOTE: Chronograph minute hand will synchronize with
chronograph second hand during chronograph zero reset.
ChRONOGRaph STOpwaTCh
1/10 SECOND HAND
MINUTE HAND
SECOND HAND
Time Setting
1 . Pull crown out to position 3 .
2 . Set time by turning crown clockwise .
3 . Return crown to position 1 to start watch .
Using the Stopwatch
1 . Press A to start/stop the stopwatch .
2 . Press B to control the split time and reset .
Stopwatch hand adjustment
1 . Pull crown out to position 3 .
2 . Press A to reset the stopwatch 1/10 second hand to the
"0" position .
3 . Press B to reset the second and minute hands . The hands
only move clockwise .
4 . With each press of A or B, the hands move one position .
They move quickly if the buttons are kept pressed .
VD55
A
1 2 3
B
4
NOTE: If the stopwatch hands function improperly, pull out
crown and press A and B at the same time for over 2 seconds.
When the buttons are released, the stopwatch second and
1/10 second hands will spin around and return to "0." This will
indicate that the internal circuit has been reset.
Date Setting (on some models only)
1 . Pull crown out to position 2 .
2 . Turn clockwise until desired date appears in window .
3 . Return crown to position 1 .
LED
FO-009
A
Normal Time Display
1 . Press B for LED display; LED will show time .
2 . With time shown, press B to display date .
3 . After time or date display and no pusher is pressed for 3
seconds, time will scroll . Display will automatically turn off
after time scrolling is complete .
Time and Calendar Setting
1 . Press B for time display .
2 . Press and hold A immediately for 2 seconds to enter setting
mode; 12/24-hour format will begin flashing .
3 . Press B to increase digits; press and hold B for fast advance .
4 . Press A to advance to next setting value .
5 . Setting sequence is: 12/24-hour format, hour, minutes, year,
month, date, and exit setting mode .
NOTE: If no pusher is operated for 7 seconds, setting will be
saved and the display will return to time display.
B
5