Asafety Instructions - Tectro TP 1020 Instrucciones De Uso

All manuals and user guides at all-guides.com
A
SAfetY inStructiOnS
read this user manual carefully before using the appliance and keep it for
future reference. install this device only when it complies with local/national
legislation, ordinances and standards. this product is intended to be used as an
air conditioner in residential houses and is only suitable for use in dry locations,
in normal household conditions, indoors in living room, kitchen and garage.
G
Before connecting the device, check that:
• The connection voltage corresponds to that on the type plate.
• The socket and power supply are suitable for the device.
• The plug on the cable fits the socket.
• The device is on a stable and flat surface.
Have the electrical installation checked by a recognised expert if you are not sure
that everything is in order.
• The airconditioner is a safe device, manufactured in accordance with CE
safety standards. Nevertheless, as with every electrical device, exercise caution
when using it.
• Never cover the air inlets and outlets.
• Empty the water reservoir through the water drain before moving it.
• Never allow the device to come into contact with chemicals.
• Do not insert objects into the openings of the device.
• Never allow the device to come into contact with water. Do not spray the
device with water or submerge it as this may cause a short circuit.
• Always take the plug out of the socket before cleaning or replacing the
device or a part of the device.
• NEVER connect the device with the aid of an extension cable. If a suitable,
earthed socket is not available, have one fitted by a recognised electrician.
• Always consider the safety of children in the vicinity of this device, as with
every electrical device.
• Always have any repairs – beyond regular maintenance – carried out by a
recognised service engineer. Failure to do so may lead to invalidation of the
guarantee.
4
68
imPOrtAnt
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• The installation must be completely in accordance with local
regulations, ordinances and standards.
• The device is suitable exclusively for use in dry places, indoors.
• Check the mains voltage. This device is suitable exclusively for
earthed sockets – connection voltage 230 Volt/ 50 Hz.
• The device MUST always have an earthed connection. You may
absolutely not connect the device if the power supply is not earthed.
• The plug must always be easily accessible when the device is
connected.
• Read these instructions carefully and follow the directions.