Selecting The Audio Mode - Kathrein UFO UFO 394 Manual Del Usuario

2.6.2 Selecting the TV standard
*** UFO 394-I
244.25 MHz Standard B/G
HF on Level
16:9 Letterbox
2.6.3 Switching the output signal on/off
*** UFO 394-I
244.25 MHz Standard B/G
on
HF on Level
16:9 Letterbox
2.6.4 Setting the common output level
*** UFO 394-I
244.25 MHz Standard B/G
HF on Level
16:9 Letterbox
2.6.5 Selecting the picture format
*** UFO 394-I
244.25 MHz Standard B/G
HF on Level
Letterbox
16:9 PanScan
2.7

Selecting the audio mode

I 1236 MHz
TV Das Erste
Outp. CH12 244.25MHz
Auto
Auto Vol+0dB AV
All manuals and user guides at all-guides.com
The "TV Standard" parameter allows selection between the standard B/G,
D/K and I.
***
B/G
Note:
B/G: 7 MHz or 8 MHz channel raster, audio carrier: 5.500 MHz and 5.742 MHz
-7
D/K: 8 MHz channel raster, audio carrier: 6.5 MHz
I: 8 MHz channel raster, audio carrier: 6.0 MHz
The output channel can be switched on/off via the "Output RF on/off"
parameter.
***
-7
The parameter "Output Level" allows the output level of the output channel to
be continuously varied in 40 steps (approx. 20 dB).
***
The setting limits are designated "Min" and "Max".
-7 -
Selecting the procedure for reception of 16:9 wide-screen format:
***
Letterbox
Pan & Scan (always 4:3)
-7
Selecting the audio mode.
27.5 MS
The scroll buttons allow selection of the following audio modes:
deu
"Auto", "Mono", "Stereo", "2-channel", "2-channel A" and "2-channel B"
Note:
- In "Auto" the audio mode is set by the SAT signal
- In "2-channel A" only channel 1 is transmitted during 2-channel reception
- In "2-channel B" only channel 2 is transmitted during 2-channel reception