Bellman & Symfon BE1411 Manual Del Usuario página 24

All manuals and user guides at all-guides.com
Programming
You can teach the door transmitter to recognize the sound of your doorbell.
1 Press and hold button 1 until the LED blinks. Release it to start the recording.
2 Ring the doorbell 5 times (pause between each press). The recording lasts for
5 min and ends automatically. Press button 1 to stop it manually.
3 When it's finished, the LED stops blinking. If the LED is red, see Trouble
shooting. Record the intercom with button 2 by repeating steps 1-2 above.
1
23
BE1411_055MAN009.indb 5
2 3
Green: OK Grön: OK
Red: Not OK Röd: Ej OK
2015/2/11 9:51:36