Rechargeable Battery - Cembre SD-19BR Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Batteries are supplied with a charge ≤ 30%. To maximise energy level, it is necessary to
fully recharge them before use. Only use the battery charger supplied with the machine.
Charge the battery by following the instructions provided in the battery charger manual, approxi-
mately 50-60 minutes are required to charge a fully depleted battery with ASC ULTRA fast charger.
The battery is equipped with LED indicators that indicate the remaining
battery life at any time by pressing the adjacent button (C):
4 LEDs illuminated: fully charged
2 LEDs illuminated: 50 % capacity
1 LED fl ashing: minimum charge, the battery is
almost depleted and needs to be charged. The electro-
nics protect the battery from any damage caused by
complete depletion.
A completely charged battery provides 100% of its
energy between -20 and + 50 °C (- 4 and +122 °F).
Continuous overload causes deactivation due to overheating. In such a case, allow the battery
to cool down; if the battery feels hot to the touch, it can be cooled down more quickly by inser-
ting it into the relevant "AIR COOLED" battery charger.
Optimal battery storage temperature is between 10 and 30 °C(50 and 86 °F).
4.1) Insertion / Removal of the battery
Only for SD-19BR SD-19BRA SD-19BR2E SD-19BRT standard versions
Removal of the battery:
Move the switch (8) to the central OFF position.
Unlock the battery by the button (P) and remove it in an upwards
direction.
Insertion of the battery:
Move the switch (8) in central OFF position.
Slide the battery down the guides until in place and locked by the button (P).
Before inserting the battery, move the Motor switch (8) to the central OFF position: if not,
the machine does not start, a green LED lights up and display screen fl ashes.
To restore function, move the Motor switch (8) to the OFF position then start the machine.
4.2) Insertion / Removal of the battery
Only for -RP.. version with protective rainproof cover
Removal of the battery:
Move the switch (8) to the central OFF position.
Lift the cap (25) and retract the upper and lower parts of the rainproof cover (23) to expose the
battery (Fig. 7a).
Unlock the battery by the button (P) and remove it in an upwards direction (Fig. 7b).
13

4. RECHARGEABLE BATTERY

(Ref. to Fig. 6)
(Ref. to Fig. 7)
C
8

Publicidad

Tabla de contenido
loading

Tabla de contenido