Navigation Menu - Cembre SD-19BR Manual De Uso

The navigation menu is shown on the OLED display (13) on
the side of the drill. The capacitive touch button (14) for menu
selection is placed under the display and allows selection of
various screens only when the display is on.
6.1) Structure of the "main menu"
0h00m
0h00m
0
RPM
BATTERY
SD-19BR
FW S1K250...
6.2) Main screen (white frame)
The 'Main screen' is defi ned by the white frame which is displayed at
machine start-up.
Each screen can be set as the "main screen" as follows:
Display the chosen screen and hold fi nger on the button (14) for
at least one second until the white frame appears.
6.3) Reset the partial counter
The partial usage time (
Set the counter screen as the main screen (white frame) ref. to § 6.2.
Hold fi nger on the button (14) for at least one second until the counter 0h00m is reset.
2h13m
0h27m
17

6. NAVIGATION MENU

total usage time of the machine expressed in hours (h) and minutes (m)
partial hours and minutes (Ref. to § 6.3 for details).
(Factory setting shown)
0
RPM
Battery charge level.
Cembre logo, drilling machine model.
Firmware version of the electronic control card.
) can be reset as follows:
TOT
PAR
1 s
main screen
13
Operating mode setting (drilling / reverse)
and instantaneous spindle speed.
2h13m
0h00m
0h27m
0h00m
14
1 s
0h00m 2h13m
TOT
0h00m
0h00m
PAR
1 s
resetting