Cembre SD-19BR Manual De Uso página 20

9. STORING THE DRILLING MACHINE
When work has been completed, store the drilling machine by proceeding as follows:
Remove the battery from the drilling machine, thoroughly clean it with a dry cloth and place
in the appropriate canvas bag CVB-032, also suitable for the storage of the battery charger and
the spare battery.
Carefully clean the drilling machine, remove all wood shavings.
Place the drilling machine, batteries, battery charger in a sealed place free from dust, moisture
and the risk of accidental impact.
The optimum storage temperature of the batteries is between 10 °C and 30 °C.
For better protection Cembre recommends the use of the VAL-SD metal case (ref. to designed for
this purpose, which enable to store the drilling machine with disassembled PRM-UN detachable
guard, canvas bag for batteries and battery charger.
10. ADDITIONAL ACCESSORIES AVAILABLE
10.1) PV... Augers with Ø 14 mm shank
ø
TYPE
(mm)
PV100 10
PV130 13
PV140 14
PV150 15
PV160
16
PV160-465
PV170
PV170L 17
PV170-465
PV180 18
PV190 19
PV200 20
PV210 21
PV220 22
PV250 25
PV280 28
Correct operation of the machine and the safe rapid release of the augers in the
event of an emergency is only guaranteed when using original
L
Max. drilling
thickness: (mm)
(mm)
325 200
325 200
325 200
325 200
325 200
465 340
325 200
375 250
465 340
325 200
325 200
325 200
325 200
325 200
325 200
325 200
L
Cembre
PV augers.
20