Bit Installation; On/Off Switch - Dexter 20VIW2-350.1 Instrucciones Legales Y De Seguridad

5.OPERATION
1
WARNING : TO Prevent serious injury from accidental operation:
Make sure that the switch is in the off-position and remove its Battery Pack before performing
any procedure in this section.
CAUTION!
________Only use impact rated accessories with this tool. Other accessories
may shatter, chip, or crack during operation.
Connect an appropriate, impact rated square drive socket (sold separately) onto the anvil.
• To switch on the tool, press the on/off switch
• To switch off the tool, release the on/off switch
shown on the left/right switch
Set the Left/right switch to
Set the Left/right switch to
• Change the direction of rotation only when the machine is not in operation !
CAUTION! Set left/right switch to center switch Lock position during set up, when changing
•
sockets or when tool is idle.
NOTICE: Do not change direction of rotation while Anvil is rotating. Wait until Anvil has
come to a complete stop before changing direction.
2
3

Bit Installation

On/off switch

Left /right switch
1. Impact wrench
2. Battery pack(not include)
3. Release button
FR
ES
PT
IT
EL
PL
RU
UA
KZ
RO
BR
EN
209