Using The Remote Control; Function Button And Audio Button - Pioneer DEH-P8600MP Manual De Instrucciones

Before You Start
! Do not store the battery with metallic materi-
als.
! In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
! When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutions rules that
apply in your country/area.

Using the remote control

Point the remote control in the direction of the
front panel to operate.
! The remote control may not function prop-
erly in direct sunlight.
Important
! Do not store the remote control in high tem-
peratures or direct sunlight.
! Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.

FUNCTION button and AUDIO button

You can also select the desired mode by
FUNCTION button and AUDIO button on the
remote control. But operation of FUNCTION
button and AUDIO button on the remote con-
trol differs from the operation of
MULTI-CONTROL on the head unit. When op-
erating the remote control, switch through the
modes as described below to select the mode.
FUNCTION button operation
% Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press FUNCTION repeatedly to switch be-
tween the following modes:
PLAY MODERANDOMSCANPAUSE
SEARCH MODETAG READCOMP/BMX
DISC TITLE
Note
Refer to Introduction of advanced built-in CD
player operation on page 25.
AUDIO button operation
% Press AUDIO to select the desired
mode.
Press AUDIO repeatedly to switch between
the following modes:
BALNW 1NW 2NW 3NW 4POSI
TA 1TA 2LOUDG.EQ 1G.EQ 2BBE
ASLSLA
FAD/BALPOSITA 1TA 2LOUD
G.EQ 1G.EQ 2SW 1SW 2SW 3
F-HPF 1F-HPF 2R-HPF 1R-HPF 2BBE
AUTO-EQASLSLA
Note
Refer to Introduction of audio adjustments on
page 54.
Section
01
9
En