Using The Feature Demo; Using Reverse Mode; Switching The Ever Scroll; Switching The Flap Auto Open - Pioneer DEH-P8600MP Manual De Instrucciones

Initial Settings
1 Use MULTI-CONTROL to select TEL 2.
The function name tag TEL 2 is highlighted.
2 Press MULTI-CONTROL to turn the tele-
phone standby on.
TEL-Standby :ON appears in the display.
# To turn the telephone standby off, press
MULTI-CONTROL again.

Using the feature demo

The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON.
You can turn the feature demo on or off.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
1 Use MULTI-CONTROL to select DEMO.
The function name tag DEMO is highlighted.
2 Press MULTI-CONTROL to turn the fea-
ture demo on.
Demonstration :ON appears in the display.
# To turn the feature demo off, press
MULTI-CONTROL again.

Using reverse mode

If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds.
You can turn the reverse mode on or off.
! Some entertainment displays may not oper-
ate the reverse mode.
1 Use MULTI-CONTROL to select REV.
The function name tag REV is highlighted.
2 Press MULTI-CONTROL to turn the re-
verse mode on.
Reverse mode :ON appears in the display.
# To turn the reverse mode off, press
MULTI-CONTROL again.

Switching the Ever Scroll

When Ever Scroll is set to ON, CD text infor-
mation scrolls continuously in the display. Set
to OFF if you prefer the information to scroll
just once.
1 Use MULTI-CONTROL to select SCROLL.
The function name tag SCROLL is highlighted.
2 Press MULTI-CONTROL to turn the Ever
Scroll on.
Ever-scroll :ON appears in the display.
# To turn the Ever Scroll off, press
MULTI-CONTROL again.

Switching the flap auto open

For theft protection, the front panel opens
automatically and easily detaches. Flap auto
open is on as a default.
1 Use MULTI-CONTROL to select
AUTO OPEN.
The function name tag AUTO OPEN is high-
lighted.
2 Press MULTI-CONTROL to turn the flap
auto open on.
Face auto open :ON appears in the display.
# To turn the flap auto open off, press
MULTI-CONTROL again.
Section
13
71
En