PEERLESS SA740P Manual Del Usuario página 9

WARNING
• Do not remove screw or loosen screw until it is no longer engaged with the mount. Doing so may cause the
screen to fall.
If more or less tension is desired in the arm pivot points, do the following:
5
• To increase tension, turn tension screw(s) clockwise with 3/16" allen wrench (D).
• To reduce tension, turn tension screw(s) counter-clockwise with allen wrench. Do not turn more than half a turn.
TENSION SCREWS
9 of 27
ISSUED: 05-18-05 SHEET #: 095-9234-4 08-23-05
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.