Use; General Information; Reading And Keeping The Instructions For Use - Scottoiler 10004488 Instrucciones De Montaje Y Uso

2 | Use

Flow rate
adjuster knob
Reservoir with
metering valve (RMV)
Height difference creates
oil pressure
Rotating syphon
finds oil if RMV is
horizontal
The greater the
height the more
oil that will flow

3 | General information

3.1 | Reading and keeping the instructions for use

These instructions apply exclusively to the Louis edition
Scottoiler. They contain important information on installation,
handling, maintenance, safety and the warranty.
The Louis Special Edition Scottoiler is not designed for any
specific type of vehicle. It can be used successfully on many
different bike models with a chain drive. To do so, a vacuum
connection for operation of the oiler must be available for
use on the intake tract of the engine.
Read the instructions carefully, in particular the safety
instructions, before using the Scottoiler. Failure to adhere
to these instructions for use can lead to serious injury or
damage to the Scottoiler.
16
All manuals and user guides at all-guides.com
Connection
for bleeding,
to magnum
and lube
Diaphragm spring
Valve
Engine vacuum opens valve
Vacuum damper
elbow
tank
Breather tube
tube
Rubber filler plug
Capillary
movement of oil
to other side of
chain
The instructions for use are based on the standards and
regulations valid in the European Union. If abroad, observe
country-specific guidelines and laws. Keep the instructions
for use for future reference. If you pass the Scottoiler on to
third parties, you must hand over these instructions for use.
Engine performance is not affected
because only 3 ml of air moves
to and fro.
To the engine vacuum
Oil is dispensed into the chain via
the sprocket
Centrifugal
force
distributes
oil into
chain