YATO YT-82165 Manual Del Usuario página 14

PRODUCT OVERVIEW
The multi-purpose wood table saw is a device for straight and angular sawing of wood and wood-based products. Thanks to the
fact that the saw is equipped with a base, it does not need to be attached to tables or work bases. As the proper use of the power
tool is a condition for the correct, reliable and safe operation of it, please
Read and keep the entire manual before the fi rst use of the tool.
The tool supplier shall not be liable for any damage resulting from failure to comply the safety instructions and recommendations
specifi ed in this manual.
ACCESSORIES
The product is delivered complete, but requires certain preliminary assembly actions described in further sections of the manual.
A cutting disc and base are supplied with the product.
SPECIFICATION
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Electrical protection class
Operating mode*
Rated rotary speed
External diameter of the cutting disc
Internal diameter of the cutting disc
Minimum thickness of the cutting disc
Maximum thickness of the cutting disc
Riving knife thickness
Cutting thickness (90 O )
Cutting thickness (45 )
O
Work table dimensions
Dust extraction outlet diameter
Weight
Ingress protection rating
Noise
- Sound Pressure L ± K
pA
- Acoustic Power L ± K
wA
* S1 - continuous operation, S6 25% - intermittent operation with idle intervals. Operation under load may last for 25% of a 10-min-
ute period (2.5 minutes) and the rest of operation should be performed in idle gear.
GENERAL SAFETY PRINCIPLES
CAUTION! When using power tools, basic safety principles must be observed. This will reduce the risk of fi re, electric shock and
personal injury.
Before using the product, please read and keep this manual.
Keep your workplace clean. Soiled areas and tables increase the risk of injury.
Pay attention to the working environment. Do not expose the tool to rain. Do not use the tool in humid or wet environments. Pro-
vide proper illumination of the workplace. Do not use the tool in the presence of fl ammable liquids or gases.
Protection against electric shock. Avoid body contact with earthed surfaces (e.g. pipes, radiators, burners, refrigerators).
Keep the product out of reach of unauthorised persons. Do not allow unauthorised persons, especially children, who are not
involved in the work to touch the tool or the extension cord. Keep unauthorised persons at a safe distance from the workplace.
Product storage. The product should be stored in a dry, closed place, out of reach of children.
14
All manuals and user guides at all-guides.com
O R I G I N A L
GB
Units
[V~]
[Hz]
[W]
[min -1 ]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[kg]
[dB(A)]
[dB(A)]
I N S T R U C T I O N S
Value
YT-82165
220-240
50
2000
II
S1 1800 W
S6 25% 2000 W
5000
250
30
2.1
2.8
2
85
65
940 x 642
35
21
IPX0
91 ± 3
104 ± 3