Wall Assembly; Environment Protection - Jata hogar 713 Manual Del Usuario

WALL ASSEMBLY

• Make 1 hole in the wall.
• Put the 1 raw plug into the hole and then the screw.
• Do not put the screw all the way in. The head of the screw must remain a few
millimetres from the wall.
• Next place the appliance on the screw making coincide it with the slot placed on the
back side of the appliance.
YOU MUST BEAR IN MIND
• Avoid exceeding the maximum capacity of the scale (15 Kg.). If the maximum capacity
is exceeded the message "o-Ld" will appear on the display.
• You must proceed to change the batteries when the "Lo" symbol is showed on the
display. To do that, open the cover placed in the back side of the appliance.
• The scale is a sensible electronic instrument. Some appliances of high frequency as
mobiles, radio stations, remote controls and microwaves, can cause disturbs if the
scale is used nearly of them. Keep it far away of these points if you notice irregularities
on the display.
• The scale is not apt for commercial transactions or medical purposes.
• Designed for domestic use only.

ENVIRONMENT PROTECTION

• Dispose the appliance according to the local garbage regulations.
• Dispose the batteries according to the local garbage regulations.
• Never throw away the appliance or the batteries to the rubbish.
So you will help to the improvement of the environment.
• The batteries must not be mixed with other domestic residues.
All manuals and user guides at all-guides.com
10