Switching The Laser On And Off; Tips And Tricks; Maintenance And Cleaning; Disposal - Parkside PHKSA 20-Li A2 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 126
Switching the laser on and off
Switching on
Press the ON/OFF switch laser
Switching off
Press the ON/OFF switch laser

Tips and tricks

Avoid damaging the cutting edge of sensitive
materials, e.g. coated chip boards or doors, by
sticking masking tape along the cutting line. This
also makes it easier to mark a line on the tape
than on a shiny surface. An even more effective
method of protecting the cutting edges is to
clamp a thin piece of wood along the cutting
line (this wood is also sawn).

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
The cordless hand-held circular saw is mainte-
nance-free.
The appliance must always be kept clean, dry
and free from oil or grease.
Never allow liquids to get into the appliance.
Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
The blade guard must always move freely and
close automatically. Therefore, keep the area
around the blade guard clean at all times.
Remove dust and chips by blowing them out
with compressed air or with a brush.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
Replacement parts not listed (such as
batteries, battery charger) can be ordered
via our service hotline.
12
 GB │ IE

Disposal

.
.
be collected separately and recycled in an
environmentally compatible manner.
cled according to Directive 2006/66/EC. Take the
battery pack and/or tool to a nearby collection
facility.
Please contact your local authority or town council
for information about disposal options for used
power tools/battery packs.
nents for disposal if necessary. The packaging
material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites.
The packaging is made from environ-
mentally friendly material which can
be disposed of at your local recycling
plant.
Do not dispose of power tools
in the normal domestic waste!
European Directive 2012/19/EU
requires that worn-out power tools
Do not dispose of batteries
in your normal household waste!
Remove the batteries from the tool
before disposal. Defective or worn-out
rechargeable batteries must be recy-
Dispose of the packaging in an environ-
mentally friendly manner. Note the
labelling on the packaging and sepa-
rate the packaging material compo-
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product.
The product is recyclable, subject to
extended producer responsibility and
is collected separately.
PHKSA 20-Li A2

Publicidad

Tabla de contenido
loading

Tabla de contenido