Preparing The Machine And Choosing The Cycle - Ghibli & Wirbel S2 Uso Y Mantenimiento

8.1.b - Preparing the machine and
choosing the cycle
- By turning the key (7) to the "1" position,
the leds of the device (8) show the bat-
tery charge level and the display (8a) in-
dicates the working time of the machine.
- Release the lever (9) and lower it; the
floor squeegee (4) is lowered.
- Push the pedal (10), disengage it from
the special hook and lift it to lower the
brushes (11).
Working cycle:
- The machine can perform 4 working cy-
cles:
Drying only cycle:
- In order to perform the drying cycle alone,
press the switch (12). The suction unit will
activate.
To start traction, operate the special con-
trols.
Brushing only cycle:
- To select the brushing cycle only, push
the button (13) to enable the rotation of
the brushes.
To start the rotation of the brushes and
the traction, use the levers placed on the
big handle.
Washing, brushing cycle:
- Push the button (13) to enable the rota-
tion of the brushes; push the button (14)
to enable the water flow.
Washing, brushing, drying cycle:
- Push the button (12) to start the suction
unit; push the button (13) to enable the
rotation of the brushes and push the but-
ton (14) to enable the water flow.
To start the rotation of the brushes, the
traction and the water flow, use the levers
placed on the big handle.
8a
14
11
5
ENGLISH - 18
www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
8
13 7
12
3
10
9
1
4
Fig. 11